Welcome
to San
Diego Appliance Repair we are locally established company
specializing on San Diego Stove repair. We have a total
solution for all San Diego stove repair needs. San Diego
Appliance
Repair has more to offer than most local contractors.
- We provide same day San Diego County Stove Service 24/7
- Service call is free with the stove repair
- California Certified Technicians on All Major Stove
Brands/ Models
- $15.00 off stove repair coupon online
- We serve all San Diego County
- Low price San Diego Stove Repair guarantee
- Satisfaction Guaranteed or Your Money Back!
You can always check our easy to repair oven tips or let us
take care of all your stove needs.
At San Diego Appliance Repair we want to help you managing
your busy life and schedule your San Diego stove repair appointment
as conveniently as possible. As always, you can call us at:
800 434-7282
You may now schedule your appointment online. Please email
us at appointment@appliancerepairsandiego.com
. We will confirming your appointment in the next 60 minutes:
Easy to Fix Tips
Electric- If your burners are not heating...
- Make sure they are sitting straight in their proper positions.
- Check to see if power is getting to the unit. Does anything
turn on--even a light? If not, check for a blown fuse
or tripped circuit breaker. Similar issues can be found here is well
Often the main wiring connection from the house, at the
stove, gets burned and so breaks the connection. Then you
may have
to replace the power cord to the stove, and the terminal
block that the wire is attached to. There may be a broken
or burned
wire at the back of the stove. If you repair any of the wires,
use only proper appliance-grade wire and wire connectors. You can also find more info here
Heating elements eventually burn out. Sometimes, when an element
burns out, you can see that the coil burns in two, or blisters
and bubbles.
When your stove heating element burns out, you have to replace
it because they are not repairable. If, when the heating element
burns out, the infinite switch that controls it also fails,
you have to replace it too. Check out more info about your stove
Gas- If the top burners are not lighting...
A gas unit will need the pilot light adjusted or relit from
time to time, but most problems with this type of range should
be left to a appliance technician. You can, however, clean
the burner ports with a paper clip when your burner flames
are uneven. Check your surface burners to see if they have
removable caps and wash them in a mixture of ammonia with hot
water. When your burner flames are too high, noisy, or the
flame is yellow, have the gas company adjust the air gas mixture.
When your pilot light is lit and properly adjusted but a burner
will not light, it is often because the burner or pilot ports
are clogged. To clean them you will need to lift the top of
your unit and lift out the burner assembly. Use a straightened
paper clip to unclog the burner and pilot pots and then wash
the burner head in ammonia mixed with hot water. Thoroughly
dry the burner head before you replace it to insure that moisture
will not interfere with it lighting. If you live in North County or Orange County click here
For all other issues please call 24/7 at 800 434-7282 or simply
click here to schedule your Appointment
Online.
Similar site with helpfull info
|